Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. hb20
    4. : 2019-2024 (MK 2)

Hyundai hb20 Years 2019-2024 (MK 2)

Hyundai hb20 (2019-2024 / MK 2)
How to reset the service in the Hyundai HB20?
As we can see in this tutorial, resetting the service in the Hyundai HB20 is a very simple and fast operation. Before proceeding, we will need to have …read all…
Posted on 7 September 2022 by ScegliAuto
Hyundai hb20 (2019-2024 / MK 2)
How to change the cabin filter on Hyundai HB20
Also on the Hyundai Hb20, the cabin filter is located behind the glovebox. It is therefore necessary to remove it, but it is very simple because in reality …read all…
Posted on 5 July 2022 by ScegliAuto
Hyundai hb20 (2019-2024 / MK 2)
How to reset the service in the Hyundai HB20?
As we can see in this tutorial, resetting the service in the Hyundai HB20 is an extremely simple and fast operation. Before proceeding, we will obviously have …read all…
Posted on 9 June 2022 by ScegliAuto
Hyundai hb20 (2019-2024 / MK 2)
How to install a new antenna on the Hyundai Hb20
If we intend to customize our car by installing a more performing antenna with a different design on the roof, we can follow the instructions given in this …read all…
Posted on 28 May 2022 by ScegliAuto
Hyundai hb20 (2019-2024 / MK 2)
How to reset the service in the Hyundai Hb20
In this video tutorial you can see how you can reset the service warning light in the Hyundai Hb20. First you need to perform maintenance on your vehicle, such …read all…
Posted on 27 April 2024 by ScegliAuto
Loudspeaker (2) Antenna (1) -board computer (1) Checks and maintenance (1) Throttle body (1) Air filter (1) Gear Shift Knob (1) Fuel pump (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos