Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the internal fuse box on the Iveco Stralis 450

Model: IVECO Stralis
Part: Fuse box

In today's video we will see the positioning of the Iveco Stralis 450 internal fuse box. First of all, we get on board the passenger compartment and begin to open the glovebox on the passenger side; after which we unscrew the two fixing screws that we find in front, in order to remove the glovebox, as shown in the video. At this point we access the fuse box of our tractor, which we find housed on the dashboard; we use the use and maintenance booklet to use the fuse diagram, in order to identify and replace any blown fuse!

Posted on 19 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Positioning of the internal fuse box of the Iveco Stralis.
Positioning of the internal fuse box of the Iveco Stralis.
IVECO Stralis Below we will see the steps that will allow us to locate the internal fuse box of the Iveco Stralis, following the instructions below. First of all, …
What is the fuse scheme and where is the fuse box of an Iveco Stralis located?
What is the fuse scheme and where is the fuse box of an Iveco Stralis located?
IVECO Stralis (2002-2008 / MK 1) The video attached to this article shows the positioning diagram of all the fuses of our Iveco Stralis. The fuses have the role of preventing damage …
Where are the fuses located in the Iveco Stralis?
Where are the fuses located in the Iveco Stralis?
IVECO Stralis (2002-2019 / MK 1) All the fuses of the Iveco Stralis are located inside the appropriate fuse box: this box is in turn located inside the cabin, immediately below the s…

Other guides you may be interested in

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos