Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : How to remove the DPF on a Citroen C4

Citroen C4 - Video tutorial

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Particulate filter
Operation: How to remove the DPF on a Citroen C4

Let's see in this video how to remove the FAP on a Citroen C4. Lift the bonnet and put it in safety, then, with a fixed wrench, unscrew the locking bolt of the DPF sensor, then, remove the tightening pins of the same. Once the piece has been disassembled from its seat, we are going to detach the various wiring and pipes present on the Fap with a screwdriver. We disassemble the various components of the FAP and clean them with a special product for cleaning the mechanical parts. Once the piece has been refurbished, we put the pieces together. Finally we reassemble the DPF in the engine compartment, with all the pins and the attached pieces.


Posted on 11 October 2023 by ScegliAuto

    Frequently Asked Questions

    • C4 2020-2027 - What to do if the particulate filter light comes on on Citroen C4? Read Answer
    • C4 2010-2018 - How much does it cost to replace the DPF filter on my Citroen C4? Read Answer
    • C4 2010-2018 - What does the Citroà «n C4 particulate filter warning light mean? Read Answer
    • C4 2010-2018 - What does the Citroà «n C4 particulate filter clogging warning light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos