Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump of the Citroen C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel pump

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the fuel pump of the Citroen C4. First, open the rear doors and start by removing the rear seat; then take off the fuel pump cover, disconnecting the pipes and the electrical connector as shown in the video.

At this point, unscrew the pump ring to remove it from the tank; then replace the fuel pump or sender unit, installing the original one by applying the reverse procedure of disassembly!


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Removing Fuel Pump and Float from Citroen C4
Removing Fuel Pump and Float from Citroen C4
Citroen C4 (2004-2010 / MK 1) In today's tutorial video, you will learn how to remove the fuel pump (including the float) from a Citroen C4. First, note that the float is located …
Where are the Fuses in a Citroën C4?
Where are the Fuses in a Citroën C4?
Citroen C4 (2010-2018 / MK 2) The fuse boxes in a Citroën C4 contain the fuses that control the operation of the devices installed in the car. In this type of vehicle, there are t…
Where is the oil filter of the Citroen C4 located?
Where is the oil filter of the Citroen C4 located?
Citroen C4 (2004-2010 / MK 1) When we need to perform an oil change, it is necessary to also replace the oil filter. The oil filter in the Citroen C4 car is located inside the fro…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos