Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Water Pump and Timing Belt on Citroen C4 1.6i

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Pump

In this video, we will see how to remove and replace the water pump and timing belt on a Citroen C4 1.6i, following the instructions below. First, lift the vehicle and remove the front right wheel; then remove the wheel arch liner to access the crankshaft pulley, as shown in the video. At this point, loosen the tensioner to remove the serpentine belt; from the engine bay, remove the left engine mount by unscrewing the fixing bolts. Now remove the timing cover to replace the belt; unscrew the crankshaft pulley to remove it. Finally, unscrew the bolts of the water pump and disconnect the hose to remove it, following the video to the end!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Citroen C4 1.6 HDI
Replacement of the timing belt of the Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) Today we will see the process of disassembly and replacement of the timing belt of the Citroen C4 1.6 HDI, following the instructions below. First, l…
How to replace the timing belt of the Citroen C4
How to replace the timing belt of the Citroen C4
Citroen C4 (2010-2018 / MK 2) Today we will explain how to independently replace the timing belt of the Citroen C4. To replace the belt on a 1.6 HDI engine, we need to open the fr…
How to Replace the Timing Belt on a C4
How to Replace the Timing Belt on a C4
Citroen C4 (2004-2010 / MK 1) Replacing the timing belt on a Citroen C4, here’s how to do it. Lift the front bonnet of the car; remove the belt cover. Place the car on a column li…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos