Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C4
  6. : Pump

Citroen C4 - Pump

Pump Citroen C4 (2004-2010 / mk 1)

Citroen C4 (2004-2010 / MK 1)
Replacing Water Pump and Timing Belt on Citroen C4 1.6i

In this video, we will see how to remove and replace the water pump and timing belt on a Citroen C4 1.6i, following the instructions below. First, lift the …Read all…
Posted on 15 May 2026 by ScegliAuto

Airbag (5) Speaker (5) Shocks (6) Antenna (1) Car stereo (21) Battery (24) Transmission (4) Body (6) Glove compartment (2) Control unit (4) Key (32) Trunk lock (3) Timing belt (8) Air conditioner (2) A/C controls (1) Onboard computer (15) Checks and maintenance (25) Dashboard (12) Shifter boot (2) Brake rotors (2) Headlight (4) Tail light (6) Fog lights (3) Diesel particulate filter (3) Air filter (17) Cabin air filter (19) Diesel fuel filter (8) Oil filter (3) Clutch (5) Fuel injectors (1) Accessory kit (2) Light bulb (1) Side marker bulb (1) Headlight bulb (16) Tail light bulb (8) Interior dome light bulb (1) License plate light (1) (1) Handle (1) Engine (8) Power window motor (1) Starter motor (1) Transmission fluid (1) Brake fluid (1) Engine oil (7) Clock (32) Door trim panel (21) Front bumper (7) Rear bumper (1) Brake pads (5) Tires (1) Shift knob (12) Pump (1) Fuel pump (2) Car door (3) Push button (1) Instrument cluster (6) Heater core (1) Wheel (1) Fuse box (47) Seat (5) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Door lock (4) Suspension system (1) Side mirror (10) Rearview mirror (1) AdBlue warning light (6) Warning light – error code (22) Tire pressure warning light (44) Service warning light (110) Manufacturer emblem (1) Fuel cap (4) Windshield wipers (3) Thermostat (5) Cylinder head (1) Windshield washer nozzle (1) EGR valve (2) Blower motor (6)

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos