Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C4
  6. : Clutch

Citroen C4 - Clutch

Citroen C4 (2010-2018 / MK 2)
How do you replace the clutch of the Citroën C4 1.6 HDi?

In order to replace the clutch of the Citroën C4 1.6 HDi, you need to lift the car with a jack or a lift, so that the front wheels are not in contact with the …read all…
Posted on 22 February 2024 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to replace the clutch of the Citroen C4 2.0 HDI.

Let's discover together the main steps to disassemble and replace the clutch discs of the Citroen C4, following the instructions below. First, lift the car and …read all…
Posted on 28 October 2023 by ScegliAuto
Citroen C4 (2010-2018 / MK 2)
Clutch replacement on the Citroen C4 Picasso

The clutch replacement procedure is quite complex, let's try to summarize it as follows: lift the car and remove the front wheels, remove the lower …read all…
Posted on 6 May 2024 by ScegliAuto

Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos