Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : Oil filter

Citroen C4 - Oil filter

Citroen C4 (2004-2010 / MK 1)
How to replace the oil filter on Citroen C4
Let's see how to remove the oil filter on a Citroen C4. We lift the front hood and see where the oil filter is stored, then we begin to disassemble it. We open …read all…
Posted on 17 February 2024 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to replace the oil filter on Citroen C4
Open and lift the hood, then after having identified the position of the oil filter you can proceed to unscrew the top cap using a 27 mm insert and since the …read all…
Posted on 21 September 2023 by ScegliAuto
Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos