Do it yourself
| ||||
|
Citroen C4 - Brake pads
Citroen C4 (2010-2018 / MK 2)
Replacement of brake pads for Citroen C4. Let's see how to proceed to replace the front brake pads of the Citroen C4. Loosen the nuts of the front wheel, lift the car and place a safety jack …read all… Posted on 24 July 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to replace the front brake pads of a Citroen C4 In this tutorial we will see how to replace the front brake pads of a Citroen C4 car. First turn off the car, pull the handbrake and the hood release lever. …read all… Posted on 29 September 2022 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to replace the rear brake pads of a Citroen C4 Before starting, we will have to lift the rear side of our Citroen C4. So let's start by disassembling and removing the rear wheel, unscrewing the fixing …read all… Posted on 18 February 2024 by ScegliAuto
Citroen C4 (2010-2018 / MK 2)
Replacement brake pads and brake disc of Citroen c4 Replacing the disc brake and pads on a Citroen C4. Let's see the disassembly of the pieces. We lift the car on a column bridge to the desired height, remove …read all… Posted on 13 December 2023 by ScegliAuto Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |