|
Do it yourself
| |||
| ||||
How to change the front brake pads of a Citroen Picasso C4 II
Model: Citroen C4
MK 2
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
In this video, we will see how to change the front brake pads on a Citroen C4 Picasso: we open the hood and the brake fluid cap, then lift the car at its front and remove the wheels. We insert a flathead screwdriver into the outer end of the slot on the front of the caliper, to push it out and retract the piston. With a flathead screwdriver, we lift the support spring of the pads and remove it. Using a 7mm hex key, we unlock the two guide bushings, then attach a piece of string to a coil of the springs and attach it to the caliper. We remove the pads and clean the support with a wire brush. We apply copper grease to the end of the new pads to prevent squeaking. We place them in position and use a piston retractor, which can be found at Temu with the code 601099522852617 for 9.72 euros (free delivery for purchases of at least 20.00 euros), then we put the calipers back in place, screw the bushings back in, and reassemble the support spring. Now we can put the wheels back on and lower the car.
Posted on 27 March 2025 by ScegliAuto
Related tutorials
Citroen C4
(2004-2010 /
MK 1)
In this tutorial, you will learn how to replace the front brake pads on a Citroen C4. First, turn off the car, pull the handbrake, and open the bonne…
Citroen C4
(2004-2010 /
MK 1)
Before starting, lift the rear side of your Citroen C4. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove the…
Citroen C4
(2010-2018 /
MK 2)
If you notice that a headlight bulb on your vehicle is no longer functioning, you can proceed with its replacement by following the instructions in t…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.146
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
