Do it yourself
Frequently asked questions about cars and motorcycles

How to bleed the brake fluid on a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Brake fluid

In this video, we will see how to bleed the brake fluid of a Citroen C4: let's open the hood and locate the brake fluid reservoir, which is found on the top of the monoblock; we will open it and remove the filter inside, then we will drain the fluid using a pump. After that, we will replace the filter and refill it with clean fluid. The bleeding must be done in a specific order, starting from the driver's side front wheel, then the passenger side front wheel, followed by the passenger side rear wheel, and finally the driver's side rear wheel. We will need to lift each side, remove the wheel, and access the bleed valve—which is located on the brake caliper—where we will place a large container underneath to collect the fluid that will come out (which we will then dispose of properly at an authorized center). The bleed valve may be rusty, so we will spray some WD-40 on it, then attach a wrench and a polyethylene tube. We will need a helper to press the brake pedal: we will open the bleed valve to allow the brake fluid to escape, and then close it before air can re-enter the system. We will repeat this until there is no more air in the system and the brake fluid (which will be topped off as we go) is clean. Finally, we will clean the caliper with brake cleaner. We will then reassemble the wheel and move on to the next one.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2004-2010 / MK 1) In today's tutorial video, you will see how to remove and replace the engine air filter on the first series Citroen C4 with a 1.6 HDI engine. First, …
Citroen C4 (2004-2010 / MK 1) Learn how to change the air filter on a Citroen C4 MK1 1.4 16V: this component is located in the engine bay, on the passenger side, inside a black bo…
Citroen C4 (2004-2010 / MK 1) This video tutorial will explain how to check the fluids in the Citroen C4; this operation is not only very simple but also essential for the proper …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos