Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue (SCR) warning on the Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: AdBlue warning light

Video tutorial

In this guide, we will see the instructions that will allow us to reset the AdBlue liquid top-up warning and the SCR system of the Citroen C4. Before performing the reset of this warning, it is necessary to have topped up with the new AdBlue liquid, using the appropriate canister or directly at the distributor; then we connect the diagnostic software to the vehicle's OBD port, following the guided procedure and performing the reset of the SCR system error, as shown in the video.

We then verify the actual reset of the AdBlue light on the instrument panel!


Posted on 13 January 2025 by ScegliAuto


Related tutorials

How to reset the AdBlue of the Citroen C4 1.6 BlueHDI
How to reset the AdBlue of the Citroen C4 1.6 BlueHDI
Citroen C4 (2010-2018 / MK 2) Today's instructions will show us how to reset the warning light for topping up the AdBlue fluid in the Citroen C4 1.6 BlueHDI. In order to perform t…
How to Resolve P0508B AdBlue Error on Citroen C4
How to Resolve P0508B AdBlue Error on Citroen C4
Citroen C4 (2020-2026 / MK 3) The issue discussed in this video is the emissions fault message, impossible to start in 50 miles: the vehicle still runs but with the prospect of an…
How to Top Up AdBlue on the Citroën C4?
How to Top Up AdBlue on the Citroën C4?
Citroen C4 (2010-2018 / MK 2) When the UREA warning light illuminates on the Citroën C4 display, it means you need to top up AdBlue, as the level in the tank is insufficient. To t…

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos