Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the AdBlue Warning Light on a Citroen C4

Model: Citroen C4 MK 3 - Years 2020-2026
Part: Warning light – error code

If, while driving, the AdBlue warning light illuminates on the instrument panel of your vehicle and a mileage indication appears after which the car will no longer start, the instructions below explain how to proceed. In reality, you need not worry too much in this case because to turn off the light, it will be sufficient to top up the anti-pollution additive in the tank located above the fuel tank, which has a blue cap next to the fuel cap.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2010-2018 / MK 2) When the UREA warning light illuminates on the Citroën C4 display, it means you need to top up AdBlue, as the level in the tank is insufficient. To t…
Citroen C4 (2010-2018 / MK 2) To reset the Service light on the Citroën C4 Cactus, press and hold the button located at the end of the lever on the left side of the steering wheel…
Citroen C4 (2010-2018 / MK 2) To correctly reset the service light on your Citroen C4 second series (2010-2018), it only takes a few seconds. First, get into the cabin and sit in …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos