Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the AdBlue of the Citroen C4 1.6 BlueHDI

Model: Citroen C4 MK 2 - Years 2010-2018
Part: AdBlue warning light

Today's instructions will show us how to reset the warning light for topping up the AdBlue fluid in the Citroen C4 1.6 BlueHDI. In order to perform the reset, it is necessary to have topped up the AdBlue fluid; if the warning does not reset automatically, it will be necessary to use a specific diagnostic software to reset the light and any errors forcibly, as shown in the video. The tool used for this operation is the Thinktool Thinkcar, which allows us to reset the various errors on the ECU, following the video tutorial until the end!

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2010-2018 / MK 2) In this guide, we will see the instructions that will allow us to reset the AdBlue liquid top-up warning and the SCR system of the Citroen C4. Before…
Citroen C4 (2010-2018 / MK 2) When the UREA warning light illuminates on the Citroën C4 display, it means you need to top up AdBlue, as the level in the tank is insufficient. To t…
Citroen C4 (2010-2018 / MK 2) To reset the AdBlue light on a Citroën C4, you need to top up with the additive liquid, pouring it into the designated tank located at the rear lower…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos