Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the AdBlue Tank and Pump on a Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: AdBlue warning light

See other generations:
Video tutorial

Today's main instructions will show you how to remove and replace the AdBlue tank and pump on a Citroen C4. First, raise the vehicle and start unscrewing all the fixing screws located on the side of the tank; you will then need to disconnect the injection wiring and the electrical wiring, lowering the tank from the chassis.

At this point, disconnect the wiring for the AdBlue pump located inside; carry out repairs or, if necessary, replace the component, applying the reverse procedure for reassembly!


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to refill the AdBlue liquid on the Citroen C4
How to refill the AdBlue liquid on the Citroen C4
Citroen C4 (2020-2026 / MK 3) The AdBlue liquid tank on the Citroen C4 is located inside the trunk of the car; to refuel, we must therefore open the rear hood and remove the trunk…
How to Top Up AdBlue on the Citroën C4?
How to Top Up AdBlue on the Citroën C4?
Citroen C4 (2010-2018 / MK 2) When the UREA warning light illuminates on the Citroën C4 display, it means you need to top up AdBlue, as the level in the tank is insufficient. To t…
Replacing the Fuel Pump of the Citroen C4
Replacing the Fuel Pump of the Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide will show you the main steps to remove and replace the fuel pump of the Citroen C4. First, open the rear doors and start by removing the r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos