Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : Control unit

Citroen C4 - Control unit

Citroen C4 (2004-2010 / MK 1)
How do you reset the ECU in the Citroen C4?
Resorting to resetting the control unit is often considered a necessary operation, as it allows to reset the current conditions of the control unit, stored …read all…
Posted on 6 May 2024 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
What to do when a Citroen BSI control unit fails to provide a signal due to extreme cold.
In this video we see how our YouTuber's Citroen C4 is having trouble starting on a snowy winter day. And we can understand the reason behind it. The dashboard …read all…
Posted on 21 January 2024 by ScegliAuto
Citroen C4 (2010-2018 / MK 2)
To reset the control unit of the Citroen C4.
This short guide will show us some important instructions necessary to perform a general reset of the engine control unit of the Citroen C4, as well as on most …read all…
Posted on 27 August 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
Instructions for installing the additional tuning module
Open the hood, locate the control unit connector, located at the bottom center of the engine compartment to the left of the intake manifolds. Gently inserting …read all…
Posted on 27 June 2023 by ScegliAuto
Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos