Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C4
  6. : Timing belt

Citroen C4 - Timing belt

Citroen C4 (2004-2010 / MK 1)
How do you replace the timing chain of the Citroën C4?

In order to replace the timing chain of the Citroën C4, you need to open the hood so that you can access the components located inside the engine compartment. …read all…
Posted on 1 September 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to replace the timing belt of the Citroen C4

In today's video we see how to replace the timing belt in the Citroen C4. First of all, we recommend that you only proceed with the engine cold for several …read all…
Posted on 9 November 2022 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to replace the timing belt on C4

Replacing the timing belt on Citroen C4, let's see how it is changed. We raise the front hood of the car; we remove the cover of the straps. The car on a …read all…
Posted on 6 December 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to remove and change the timing belt on a Citroen C4

How to remove and change the timing belt on a Citroen C4? We lift the car on a column bridge and remove the engine guard placed under the car, then disconnect …read all…
Posted on 19 November 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to remove the timing belt on Citroen C4

Let's see how to remove the timing belt on a Citroen C4. Let's open the bonnet and lift it, let's put it in safety. We disassemble the soundproofing panel that …read all…
Posted on 16 October 2023 by ScegliAuto

Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos