Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Timing belt

In today's video, you will learn how to replace the timing belt on the Citroen C4. First, it is recommended to proceed only with a cold engine that has been off for several hours to avoid burns. You can make it easier by raising the vehicle on a ramp, if possible. Open the bonnet and locate the auxiliary belt. Start by unscrewing the fastening components, then loosen the belt from its hold. Also remove the water pump and its surrounding components and replace them. Once done, you can install the new components and finish the job.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Citroen C4 1.6 HDI
Replacement of the timing belt of the Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) Today we will see the process of disassembly and replacement of the timing belt of the Citroen C4 1.6 HDI, following the instructions below. First, l…
How to replace the timing belt of the Citroen C4
How to replace the timing belt of the Citroen C4
Citroen C4 (2010-2018 / MK 2) Today we will explain how to independently replace the timing belt of the Citroen C4. To replace the belt on a 1.6 HDI engine, we need to open the fr…
Replacing Water Pump and Timing Belt on Citroen C4 1.6i
Replacing Water Pump and Timing Belt on Citroen C4 1.6i
Citroen C4 (2004-2010 / MK 1) In this video, we will see how to remove and replace the water pump and timing belt on a Citroen C4 1.6i, following the instructions below. First, li…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 2010-2018 - When to replace the timing belt in the Citroen C4 1.6 HDI? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos