Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : Gear Shift Knob

Citroen C4 - Gear Shift Knob

Citroen C4 (2004-2010 / MK 1)
How to replace the gear knob on the Citroen C4
If the gear knob in your Citroen C4 first series (year 2004-2010) is excessively worn and you want to replace it with a new one, just follow the steps below. …read all…
Posted on 18 December 2022 by ScegliAuto
Citroen C4 (2010-2018 / MK 2)
How to replace the gear knob in the Citroen C4?
As we can see in this tutorial, replacing the gear knob in the Citroen C4 is an extremely simple and fast operation. To do this, we will need pliers, a …read all…
Posted on 21 June 2022 by ScegliAuto
Citroen C4 (2010-2018 / MK 2)
How do you replace the gear knob on the Citroà «n C4?
In order to replace the gear knob on the Citroà «n C4, you need to release the clips that secure the leather boot that surrounds the lever, so that it can be …read all…
Posted on 4 May 2024 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How do you replace the gear knob on the Citroà «n C4?
In order to replace the gear knob on the Citroà «n C4, you need to unhook the retaining clips that lock the leather boot to the base of the center console. …read all…
Posted on 8 March 2024 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
Replacement gear knob on Citroen C4
As shown in the video, detach the headset by simply pulling it with your hands and grabbing the lower frame. Raise the headset as high as you can, until it …read all…
Posted on 22 January 2024 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
Citroen C4 gear knob replacement
Today we will see how to remove and replace the gear knob of a Citroen C4 first series. First we get on board the car and remove the gearshift gaiter, also …read all…
Posted on 26 December 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
Removing the gear knob of a Citroen C4
Is the gear knob on Citroen C4 damaged? Let's see how it disassembles. We disconnect the frame of the leather cap with a plastic lever, cut the clamp. We take …read all…
Posted on 7 December 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to remove the gear lever knob of the Citroen C4
It happens quite frequently that the gearshift lever cover tends to deteriorate both due to the continuous rubbing generated by gear changes, and due to the …read all…
Posted on 2 October 2023 by ScegliAuto
Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos