Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Citroen C4?

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shift knob

See other generations:
Video tutorial

In this tutorial, see how to replace the gear knob on a Citroen C4. This operation is very simple and quick. First, separate the base of the gaiter from the centre tunnel using a plastic spatula to avoid leaving marks.

Then, lift the gaiter and cut the internal plastic tie. Next, pull the knob upwards with force to separate it from the shaft. If it seems stuck, you can try to remove it by cutting it with a utility knife.

Once done, you can insert the replacement, secure it to the gaiter with a new tie, and reassemble everything following the reverse procedure.


Posted on 15 September 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on a Citroen C4
Replacing the Gear Knob on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Today, you will learn how to remove and replace the gear knob on a first-generation Citroen C4. First, get inside the car and remove the gear gaiter,…
Replacing the Gear Knob and Gaiter on a Citroën C4
Replacing the Gear Knob and Gaiter on a Citroën C4
Citroen C4 (2004-2010 / MK 1) The instructions in this guide will show you how to remove and replace the gaiter and gear knob of the manual gear lever on a Citroën C4. First, get …
How to Replace the Gear Knob on a Citroën C4?
How to Replace the Gear Knob on a Citroën C4?
Citroen C4 (2010-2018 / MK 2) To replace the gear knob on a Citroën, simply grip the old knob with one hand while holding the leather cover at the base of the lever with the other…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos