Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob and Gaiter on a Citroën C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shifter boot

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the gaiter and gear knob of the manual gear lever on a Citroën C4. First, get inside the cabin and start detaching the gaiter found at the base by prying it from the sides; then detach the clip found between the gaiter and the knob by pulling the knob upwards until it detaches and removes it from the lever, as shown in the video.

At this point, install the new gear knob, inserting the new gaiter first; install a new clip between the gaiter and knob.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on a Citroen C4
Replacing the Gear Knob on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Today, you will learn how to remove and replace the gear knob on a first-generation Citroen C4. First, get inside the car and remove the gear gaiter,…
How to Replace the Gear Knob on the Citroën C4?
Citroen C4 (2004-2010 / MK 1) To replace the gear knob on the Citroën C4, detach the retaining clips that secure the leather gaiter to the base of the centre console. By removing …
How to Replace the Gear Knob on a Citroën C4?
How to Replace the Gear Knob on a Citroën C4?
Citroen C4 (2010-2018 / MK 2) To replace the gear knob on a Citroën C4, you need to unclip the clips that secure the leather gaiter around the lever, allowing you to lift it compl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos