Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Citroën C4?

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Shift knob

To replace the gear knob on a Citroën C4, you need to unclip the clips that secure the leather gaiter around the lever, allowing you to lift it completely. You will need to remove the ring that secures the gaiter to the knob so that it can be pulled off. Once the old knob is removed, you can install the new one and secure it to the gaiter by inserting the ring from the inside. The bottom of the gaiter should then be clipped back into its housing using the appropriate clips. After replacement, check the correct operation of the piece.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Knob on a Citroen C4
Replacing the Gear Knob on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Today, you will learn how to remove and replace the gear knob on a first-generation Citroen C4. First, get inside the car and remove the gear gaiter,…
How to change the gear knob of the Citroen C4
How to change the gear knob of the Citroen C4
Citroen C4 (2004-2010 / MK 1) In this article we will see how to replace the gear knob of the Citroen C4. For this operation you will need a pair of scissors and a clamp. First, y…
How to Remove the Gear Lever Knob of the Citroen C4
How to Remove the Gear Lever Knob of the Citroen C4
Citroen C4 (2004-2010 / MK 1) It is quite common for the gear lever gaiter to deteriorate due to constant friction from gear changes, as well as the effects of heat and car wash d…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos