Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : Tires

Citroen C4 - Tires

Citroen C4 (2010-2018 / MK 2)
How to reset the tire indicator light on the Citroen C4?
In this tutorial, we can see how to reset the tire warning light in the Citroen C4, an extremely simple and fast operation, to be performed only once the …read all…
Posted on 6 February 2024 by ScegliAuto
Citroen C4 (2020-2024 / MK 3)
How to reset the tire pressure warning light in the Citroen C4?
In this tutorial, we can see how to reset the tire warning light in the Citroen C4, an extremely simple and quick operation to be performed only after …read all…
Posted on 26 January 2024 by ScegliAuto
Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos