Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C4
  6. : Headlight

Citroen C4 - Headlight

Citroen C4 (2010-2018 / MK 2)
Headlight replacement on Citroen C4

Does the Citroen c4 headlight need to be changed? Let's see how it disassembles. Before disassembling the headlight we must disconnect the power supply …read all…
Posted on 3 December 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
How to remove a headlight on Citroen C4

Let's see how to remove a headlight on Citroen C4: open the engine hood by pulling the hood opening lever and put it in safety. We unscrew the locking pins on …read all…
Posted on 22 October 2023 by ScegliAuto
Citroen C4 (2004-2010 / MK 1)
Removing the front headlight for replacement

Using a plastic tool to avoid damaging the body, remove the plastic trim placed under the headlight. Using a socket wrench fitted with an extension, insert it …read all…
Posted on 24 June 2023 by ScegliAuto

Shock absorbers (5) Antenna (1) Car stereo (19) Battery (16) Gearbox (1) Glove box (1) Control unit (4) Key (10) Locking the trunk (2) Timing belt (5) Air conditioning controls (1) -board computer (15) Checks and maintenance (44) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Particulate filter (2) Air filter (8) Cabin air filter (10) Diesel filter (7) Oil filter (2) Clutch (3) Accessory Kit (1) Light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (1) Third brake light (1) Handle (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (6) Door panel (11) Front bumper (3) Brake pads (4) Tires (2) Gear Shift Knob (8) Pump (1) Fuel pump (2) Door (2) Instrument cluster (17) Passenger compartment heating radiator (1) Fuse box (24) Coolant temperature sensor (1) Lock (3) Outside rearview mirror (6) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (5) Engine head (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos