Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight on Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Headlight

Is the front headlight of your Citroen C4 due for replacement? Let's see how to remove it. Before removing the headlight, disconnect the power connectors. Open the bonnet by pulling the release lever and secure it. Using a screwdriver, unscrew the securing screws located at the top of the front headlight. Once the screws at the top are removed, carefully pull the headlight away from the vehicle body and disconnect the bulb holder from the headlight. Fit the new headlight with new bulbs if damaged. Screw in the securing screws above the headlight and reconnect the power connectors. Turn on the lights of the C4.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Citroen C4
Replacing Front Headlight Bulb on Citroen C4
Citroen C4 (2004-2010 / MK 1) Replace the damaged bulbs in the front headlight of a Citroen C4. Open the front bonnet and secure it. Remove the plastic cover to access the front h…
How to Replace the Front Headlight Bulb on a Citroen C4
How to Replace the Front Headlight Bulb on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Here's how to replace the front headlight bulb on a Citroen C4. Start by lifting the front bonnet, locate the headlight and the cover cap. Remove the…
Replacing Rear Bulb on Citroen C4
Replacing Rear Bulb on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replace the blown bulbs in the rear headlight of a Citroen C4. Open the rear boot and lift it. Remove the cloth cover to access the rear headlight. U…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos