Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlamp for Replacement

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Headlight

Using a plastic tool to avoid damaging the bodywork, remove the plastic trim located under the headlamp. Using a socket spanner with an extension, insert it into the hole beneath the trim and loosen the securing bolt without completely unscrewing it. Unscrew all the screws on the upper side of the headlamp assembly and carefully remove it by pulling it outward, being cautious of the electrical cables connected to it. Disconnect the various connectors and completely remove the assembly from the cables. To refit the headlamp assembly, proceed with the reverse operation.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Citroen C4
How to Replace the Front Headlight Bulb on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Here's how to replace the front headlight bulb on a Citroen C4. Start by lifting the front bonnet, locate the headlight and the cover cap. Remove the…
Replacing Front Headlight Bulb on Citroen C4
Replacing Front Headlight Bulb on Citroen C4
Citroen C4 (2004-2010 / MK 1) Replace the damaged bulbs in the front headlight of a Citroen C4. Open the front bonnet and secure it. Remove the plastic cover to access the front h…
Replacing Front Headlight on Citroen C4
Replacing Front Headlight on Citroen C4
Citroen C4 (2010-2018 / MK 2) Is the front headlight of your Citroen C4 due for replacement? Let's see how to remove it. Before removing the headlight, disconnect the power connec…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos