Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads and Disc on Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Brake pads

Replacing the brake disc and pads on a Citroen C4. Let's see how to disassemble the parts. Lift the car on a column lift to the desired height, remove the front wheel using a telescopic spanner. Unscrew the locking pin of the brake caliper and remove it from the wheel hub. Use a screwdriver to remove the pads to be replaced from the wheel hub caliper, then remove the brake caliper and subsequently the disc (unscrew the securing bolts on top of the disc). Fit the new disc and the new pads onto the caliper. Tighten all bolts and refit the wheel. Bleed the brake disc if necessary. Finally, start the vehicle and test the operation.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Citroen C4
How to Replace the Rear Brake Pads on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before starting, lift the rear side of your Citroen C4. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove the…
Replacing the Brake Pads on a Citroen C4
Replacing the Brake Pads on a Citroen C4
Citroen C4 (2010-2018 / MK 2) Follow these steps to replace the front brake pads on a Citroen C4. Loosen the nuts on the front wheel, lift the car, and place a safety stand undern…
How to Replace the Rear Brake Disc on a Citroen C4
How to Replace the Rear Brake Disc on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before you can start, you need to lift the rear side of your Citroen C4. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Ne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos