Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Oil filter

Lift the front bonnet and locate the oil filter. Start removing it. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Unscrew the large securing bolt of the container cap where the oil filter is situated. Raise the car on a jack and unscrew the bolt of the oil sump, allowing the fluid to drain into a container. Lower the car and top up the engine with new oil.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the oil filter of the Citroen C4 located?
Where is the oil filter of the Citroen C4 located?
Citroen C4 (2004-2010 / MK 1) When we need to perform an oil change, it is necessary to also replace the oil filter. The oil filter in the Citroen C4 car is located inside the fro…
How to Change the Engine Oil and Filter on a Citroen C4 MK2?
How to Change the Engine Oil and Filter on a Citroen C4 MK2?
Citroen C4 (2010-2018 / MK 2) Start the oil and filter change, which is the basic service, on a Citroen C4 MK2 by ensuring the car is off and parked safely. Unscrew the oil filler…
How to Replace the Oil and Filter on a Citroen C4
How to Replace the Oil and Filter on a Citroen C4
Citroen C4 (2004-2010 / MK 1) This operation is straightforward, but by using some tips in this video, you can optimise the result. Before performing any operation, warm up the en…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos