Do it yourself
Frequently asked questions about cars and motorcycles

How to remove parts of the Citroen C4 dashboard

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Dashboard

See other generations:
Video tutorial

In this video we can see how to remove parts of the dashboard of the Citroen C4: we will need a Torx T20 and T25 screwdriver and a plastic spatula. Insert the plastic lever on the sides of the grille and gently pry; do not pull from one side only, but gradually pull around the grille to avoid breaking the plastic hooks.

Remove the display, which is fixed with clips: disconnect the electrical connector by pressing the tab and gently pull the cable. Now it's time for the climate panel and the radio, which is fixed with 6 Torx screws: 4 are visible on the top, while 2 are hidden under a plastic cable cover.

Now we can remove the panel and disconnect the connectors. Pay attention to those with safety tabs.

Remove the radio and disconnect the cables and antenna. It is advisable to take a picture of the cables before disconnecting them to remember their position.

Put the bolts in a box to avoid losing them; if a clip breaks, it can be replaced with a universal one, which costs a few cents.


Posted on 4 August 2025 by ScegliAuto


Related tutorials

Citroen C4 (2004-2010 / MK 1) In this video, you will learn how to remove the dashboard panel from a Citroen C4. Get inside the vehicle and first remove the trim around the gear l…
Citroen C4 (2004-2010 / MK 1) Watch this video on how to remove the DPF from a Citroen C4. Lift the engine bonnet and secure it, then use a spanner to unscrew the locking bolt of …
Citroen C4 (2004-2010 / MK 1) Open and lift the front bonnet of the Citroen C4. Identify the plastic parts to be removed. Use a lever to remove the plastic cover under the front w…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos