Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter on Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Cabin air filter

Open and lift the front bonnet of the Citroen C4. Identify the plastic parts to be removed. Use a lever to remove the plastic cover under the front windscreen, then take off the filter cover (where the air filter is located). Extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly against the walls of the housing. Finally, refit the filter cover and tighten the screws. Check the correct installation of the previously mounted parts. Close the engine bonnet after completing all maintenance.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Pollen Filter on a C4
Replacing the Pollen Filter on a C4
Citroen C4 (2004-2010 / MK 1) Removing the pollen air filter on a Citroen C4? Here’s how to do it from under the windscreen. Lift the bonnet of the engine compartment, remove the …
How to Replace the Pollen Filter of the Citroen C4
How to Replace the Pollen Filter of the Citroen C4
Citroen C4 (2010-2018 / MK 2) This brief guide outlines the procedure for removing and replacing the cabin air filter of the Citroen C4. First, open the bonnet of your car and beg…
Replacing the Cabin Air Filter of the Citroen C4
Replacing the Cabin Air Filter of the Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide provides the necessary instructions for removing and replacing the cabin air filter of the Citroen C4. First, open the bonnet by pulling t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos