Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Filter on a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Engine oil

This operation is straightforward, but by using some tips in this video, you can optimise the result. Before performing any operation, warm up the engine to extract all the oil. Then, unscrew the oil filter cap to remove it. Next, prepare a container under the oil sump plug, as oil will start to drain completely once the plug is removed. After draining all the oil, you can screw the plug back in and install the new filter, securing it with the cap. Finally, add the recommended amount of oil.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Filter on a Citroen C4 MK2?
How to Change the Engine Oil and Filter on a Citroen C4 MK2?
Citroen C4 (2010-2018 / MK 2) Start the oil and filter change, which is the basic service, on a Citroen C4 MK2 by ensuring the car is off and parked safely. Unscrew the oil filler…
How to Change Oil and Engine Filter on Citroen C4
How to Change Oil and Engine Filter on Citroen C4
Citroen C4 (2004-2010 / MK 1) How to change the oil and engine filter on a Citroen C4? This guide shows how to proceed with the replacement. Open the car door and pull up the leve…
How to Replace the Diesel Filter on a Citroen C4
How to Replace the Diesel Filter on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Remove the battery (if necessary) to access the diesel filter on a Citroen C4. Locate the diesel filter as shown in the video. Using a large screwdri…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos