Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Engine Filter on Citroen C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

How to change the oil and engine filter on a Citroen C4? This guide shows how to proceed with the replacement. Open the car door and pull up the lever to open the engine compartment located at the bottom left of the dashboard, then lift the bonnet and secure it. Using a socket wrench, unscrew the large bolt securing the container cap where the oil filter is located (remove the air filter kit to access the filter) and extract it; position a new one. Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container.

Finally, top up with new fluid and close the bonnet.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Where is the oil filter of the Citroen C4 located?
Where is the oil filter of the Citroen C4 located?
Citroen C4 (2004-2010 / MK 1) When we need to perform an oil change, it is necessary to also replace the oil filter. The oil filter in the Citroen C4 car is located inside the fro…
How to Change the Engine Oil and Filter on a Citroen C4 MK2?
How to Change the Engine Oil and Filter on a Citroen C4 MK2?
Citroen C4 (2010-2018 / MK 2) Start the oil and filter change, which is the basic service, on a Citroen C4 MK2 by ensuring the car is off and parked safely. Unscrew the oil filler…
How to Replace the Oil Filter on a Citroen C4
How to Replace the Oil Filter on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Lift the front bonnet and locate the oil filter. Start removing it. Open the car door and pull up the engine compartment release lever located at the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos