|
Do it yourself
| |||
| ||||
Clutch Replacement on the Citroen C4 Picasso
Model: Citroen C4
MK 2
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
The procedure for replacing the clutch is quite complex, let's summarise it as follows: Lift the car and remove the front wheels, remove the lower soundproofing cover, remove the plastic cover protecting the wheel arch, then remove the bolts securing the anti-roll bar and all the bolts fixing the front suspension assembly. Next, unscrew the oil drain plug and remove the right wheel hub. After that, loosen the bolt securing the CV joint on the differential and extract the joint itself, remove the starter motor and the metal cover protecting the clutch. Go back to the top of the engine bay and remove the battery and ECU support plate, disconnecting all the cables. At this point, you will have access to the clutch assembly from above, first remove all the electrical connectors from the sensors. Then proceed to remove all the upper pins of the clutch assembly and lower the jack supporting the engine. Finally, unscrew the bolts securing the cover containing the clutch and remove it; at this point, you will finally have access to the clutch disc which can be extracted. Lastly, take the new clutch assembly and refit it, then proceed to reassemble all the components in reverse order.
Updated on 18 May 2026 by ScegliAuto
Related tutorials
Citroen C4
(2004-2010 /
MK 1)
You can replace the clutch on the Citroën C4 by loosening the screws that secure the gearbox to its housing, located at the lower centre of the engin…
Citroen C4
(2020-2026 /
MK 3)
Replacing the side turn signal bulb of the Citroen C4 Picasso is a simple and quick operation to be carried out independently. The cost of the bulb, …
Citroen C4
(2010-2018 /
MK 2)
Replacing the battery of the Smart Remote Key for the Citroen C4 Picasso and various other models from the French manufacturer is very simple; let's …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.074
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |