Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Citroen Xsara Picasso 2.0 HDi

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Starter motor

Below are the main steps on how to remove and replace the starter motor on the Citroen Xsara Picasso 2.0 HDi. First, open the bonnet of the vehicle and disconnect the battery; then remove the lower engine cover to access the starter motor, as shown in the video. At this point, unscrew the fixing screws to remove it, disconnecting the power wiring; carry out the repair or replacement of the starter motor, securing it properly and checking the engine starts!

Posted on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on a Citroën Xsara 2.0 HDi
Replacing the Starter Motor on a Citroën Xsara 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Let's look at replacing the starter motor on a Xsara Picasso. Lift the front engine cover and locate the starter motor. Disconnect the battery termin…
How to replace the starter motor of the Citroen Xsara Picasso 1.6 16V
How to replace the starter motor of the Citroen Xsara Picasso 1.6 16V
Citroen Xsara Picasso (1999-2012 / MK 1) In this guide we will see the main instructions that will allow us to disassemble and replace the starter motor of the Citroen Xsara Picasso 1.6 16V.…
Battery Replacement on the Citroen Xsara Picasso 2.0 HDI
Battery Replacement on the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions to remove and replace the battery of the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet of your car and start unscr…

Other guides you may be interested in

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - Where is the starter motor of the Citroen Xsara Picasso? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos