Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Citroen Xsara Picasso 1.6 16V

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Starter motor

In this guide we will see the main instructions that will allow us to disassemble and replace the starter motor of the Citroen Xsara Picasso 1.6 16V. First of all, we open the rear door of the car and start by disconnecting the battery; then we open the engine hood and remove the air filter box, disconnecting the intake hose and unscrewing the fixing screws, as shown in the video. At this point, we unscrew the starter motor screws that we find at the bottom, disconnecting the wiring to remove it and replace it with the new one!

Posted on 11 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator of the Citroen Xsara Picasso 1.6 16V
How to replace the alternator of the Citroen Xsara Picasso 1.6 16V
Citroen Xsara Picasso (1999-2012 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the alternator of the Citroen Xsara Picasso 1.6 16V. First of a…
Replacing the Starter Motor on a Citroën Xsara 2.0 HDi
Replacing the Starter Motor on a Citroën Xsara 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Let's look at replacing the starter motor on a Xsara Picasso. Lift the front engine cover and locate the starter motor. Disconnect the battery termin…
How to replace the starter motor of the Citroën Xsara Picasso
How to replace the starter motor of the Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replacing the starter motor on a Citroen Xsara Picasso car is a complex operation but can still be done independently. Before removing the starter mo…

Other guides you may be interested in

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - Where is the starter motor of the Citroen Xsara Picasso? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos