|
Do it yourself
| |||
| ||||
How to replace the starter motor of the Citroën Xsara Picasso
Model: Citroen Xsara Picasso
MK 1
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Replacing the starter motor on a Citroen Xsara Picasso car is a complex operation but can still be done independently. Before removing the starter motor, it is advisable to disconnect the negative and positive terminals from the battery to prevent a short circuit during the operation. After disconnecting the battery, disconnect the air filter connector and unscrew the screws on the filter cover to remove it and have more space for the next steps. Disconnect the starter motor terminal connector to cut off the current using a torque wrench with a 20mm insert, unscrew the bolts that secure the motor to the engine and remove it. Screw the new starter motor onto the engine using a wrench with a 20mm insert and connect the terminal for its operation. Connect the air filter connector and mount the box in its housing. Connect the positive terminal to the battery and also the negative terminal to resume the current flow inside the vehicle.
Posted on 12 March 2025 by ScegliAuto
Related tutorials
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Below are the main steps on how to remove and replace the starter motor on the Citroen Xsara Picasso 2.0 HDi. First, open the bonnet of the vehicle a…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
In this guide we will see the main instructions that will allow us to disassemble and replace the starter motor of the Citroen Xsara Picasso 1.6 16V.…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Let's look at replacing the starter motor on a Xsara Picasso. Lift the front engine cover and locate the starter motor. Disconnect the battery termin…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.158
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |