Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Citroen Xsara Picasso 2.0 HDI

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Timing belt

Let's see the main information that will allow us to disassemble and replace the timing belt of the Citroen Xsara Picasso 2.0 HDI. First, we open the hood of the car and start disassembling and removing the engine support located above the distribution cover; we lift the car and disconnect the V-belt, loosening the tensioner, as shown in the video. At this point, we remove the crankshaft pulley and unscrew the bolts of the distribution cover; we take the necessary references for the replacement of the belt, also replacing the water pump kit if necessary.

Posted on 28 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Citroen Xsara Picasso 1.6 HDI
Replacement of the timing belt of the Citroen Xsara Picasso 1.6 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below we discover how to dismantle and replace the timing belt of the Citroen Xsara Picasso 1.6 HDI. First of all, we open the hood of the car and st…
Replacing the Timing Belt on Citroen Xsara Picasso
Replacing the Timing Belt on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will learn how to replace the timing belt on the Citroen Xsara Picasso. First, lift the vehicle: the timing belt removal process i…
Replacement of the clutch cable of the Citroen Xsara Picasso 2.0 HDI
Replacement of the clutch cable of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Today's main instructions will guide us through the process of disassembling and replacing the clutch cable of the Citroen Xsara Picasso 2.0 HDI. In …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos