Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Serpentine Belt on the Citroen Xsara Picasso 2.0 HDI

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: V-belt

Below are the steps that will allow us to remove and replace the serpentine belt on the Citroen Xsara Picasso 2.0 HDI. First, lift the vehicle and start loosening the tensioner with a socket wrench, then remove the serpentine belt from the various pulleys; next, install the new original belt, ensuring it is correctly positioned and manually rotate the engine to ensure proper installation. The crankshaft pulley is replaced in the video; finally, start the engine and check the correct operation of the auxiliary services.

Posted on 6 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to replacing the timing belt of the Citroen Xsara Picasso 2.0 HDI
Guide to replacing the timing belt of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see the main information that will allow us to disassemble and replace the timing belt of the Citroen Xsara Picasso 2.0 HDI. First, we open the…
Replacement of the timing belt of the Citroen Xsara Picasso 1.6 HDI
Replacement of the timing belt of the Citroen Xsara Picasso 1.6 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below we discover how to dismantle and replace the timing belt of the Citroen Xsara Picasso 1.6 HDI. First of all, we open the hood of the car and st…
Replacing the Clutch on Citroen Xsara Picasso 2.0 HDi
Replacing the Clutch on Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch on the Citroen Xsara Picasso 2.0 HDi. First, open the vehicle's bonne…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos