Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Citroen Xsara Picasso 1.6 HDI

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

Video tutorial

Follow these steps to remove and replace the timing belt on a Citroen Xsara Picasso 1.6 HDI. First, open the bonnet of the vehicle and begin by removing the reservoir located at the top left. Then, lift the vehicle and disconnect the drive belt by unscrewing the bolt of the crankshaft pulley to remove it, as shown in the video.

Next, remove the timing cover to access the necessary references for replacing the timing belt. Refit the original belt and check the condition of the entire timing system, including the water pump.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Citroen Xsara Picasso 2.0 HDI
Guide to replacing the timing belt of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see the main information that will allow us to disassemble and replace the timing belt of the Citroen Xsara Picasso 2.0 HDI. First, we open the…
Replacing the Timing Belt on Citroen Xsara Picasso
Replacing the Timing Belt on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will learn how to replace the timing belt on the Citroen Xsara Picasso. First, lift the vehicle: the timing belt removal process i…
Replacement of the Serpentine Belt on the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the steps that will allow us to remove and replace the serpentine belt on the Citroen Xsara Picasso 2.0 HDI. First, lift the vehicle and st…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos