Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Differential Oil on a Seat Ateca

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Differential

Video tutorial

On the Seat Ateca 4Drive, the rear differential is separate from the Haldex system. The capacity is 0.95 litres of 75W-90 GL-5 oil. You will need a hex key for the plugs, a hand pump, and a bowl.

Procedure: lift the car on level ground, locate the rear differential (behind the Haldex). Unscrew the drain plug, let the old oil drain out, and re-screw the plug.

Open the fill plug, insert the pump hose, and pump oil until it flows out of the hole: this indicates the correct level. Re-screw the plug.

Check for leaks. The manufacturer considers the oil to be "lifetime", but many mechanics recommend changing it every 60,000-80,000 miles.

Do not confuse this oil with that of the Haldex, which is a specific fluid and should be changed separately.


Posted on 24 October 2026 by ScegliAuto


Related tutorials

Removing the Rear Light of the Seat Ateca
Removing the Rear Light of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) Today's steps will show you how to remove and replace the rear light and its bulbs on the Seat Ateca. First, open the boot lid and start by removing …
How to replace the remote battery on the Seat Ateca?
How to replace the remote battery on the Seat Ateca?
Seat Ateca (2016-2025 / MK 1) In this tutorial, you will see how to replace the remote battery on the Seat Ateca, a very simple and quick operation. You will need a replacement CR…
How to Change the Oil and Oil Filter in the Seat Ateca
How to Change the Oil and Oil Filter in the Seat Ateca
Seat Ateca (2016-2025 / MK 1) Below you will find information on how to change the oil and its corresponding filter in your Seat Ateca. The steps are very simple and similar to ma…

Other guides you may be interested in

How to Open the Bonnet of the Mitsubishi L 200

In this brief and simple guide, follow these quick steps to open the bonnet of the Mitsubishi L 200. First, open the front door on the driver's side and pull the release lever for the bonnet lock. Next, move to the front of the vehicle and disengage the lock lever to open it. The bonnet will be held up by hydraulic struts; to close it, push the bonnet down and apply pressure to secure it properly!

Watch the video!


by ScegliAuto

More videos