Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter in the Seat Ateca

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Engine oil

Video tutorial

Below you will find information on how to change the oil and its corresponding filter in your Seat Ateca. The steps are very simple and similar to many other models.

First, lift the car to gain easy access to the underside. Next, locate the oil sump and its filter.

Once found, first unscrew the sump plug and, using a basin, collect the used oil, then follow the same procedure with the filter. After this, you can replace the old filter and, if necessary, the sump plug.

Once these steps are completed, you can add new oil to the car.


Posted on 15 June 2026 by ScegliAuto


Related tutorials

How to Change the Rear Differential Oil on a Seat Ateca
How to Change the Rear Differential Oil on a Seat Ateca
Seat Ateca (2016-2025 / MK 1) On the Seat Ateca 4Drive, the rear differential is separate from the Haldex system. The capacity is 0.95 litres of 75W-90 GL-5 oil. You will need a h…
How to replace the cabin air filter of the Seat Ateca
How to replace the cabin air filter of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) If you want to replace the air filter inside the cabin of your Seat Ateca by yourself, just carefully read the procedure described in our new guide a…
How to Reset the Engine Oil Service Light of the Seat Ateca
How to Reset the Engine Oil Service Light of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) These brief instructions will guide you through the procedure to reset the service light for the engine oil maintenance of the Seat Ateca. First, get…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos