Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change and Oil Filter Fitting on a Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Oil filter

Before proceeding with the engine oil change and fitting the oil filter on the car, position your Seat Leon on a ramp or flat surface (to work underneath the engine) to ensure the operator's safety and stability. At this point, after warming the engine for about three minutes (to make the oil more fluid), open the front bonnet, remove the plastic engine cover, and extract the dipstick to check the oil level. Underneath the engine, remove the splash guard and, after placing a container underneath, unscrew the bolt that seals the drain hole and let the oil drain out. Locate the filter position (as shown in the images) and, using the appropriate spanner, unscrew the filter housing from its seat. Replace the filter and refit it. Close the drain hole and pour 4 litres of oil into the engine. This completes the operation!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

In the 2019 Seat Leon, how do you reset the Service light?
In the 2019 Seat Leon, how do you reset the Service light?
Seat Leon (2012-2019 / MK 3, 5F) The word Service encompasses a set of routine maintenance tasks, such as changing the motor oil, oil filter, air filter, pollen filter, and so on. If…
How to reset the oil light on the Seat Leon 1P
How to reset the oil light on the Seat Leon 1P
Seat Leon (2005-2013 / 1P) In this new mini guide of ours, we will discover together how to correctly perform the manual reset of the oil light of the Seat Leon 1P. First of al…
How to Replace the Oil Filter in the Seat Leon
How to Replace the Oil Filter in the Seat Leon
Seat Leon (2005-2013 / 1P) Open the car's bonnet, pull the dipstick, and lift it on the ramp. Open the breather and let the engine oil drain out. Now unscrew and replace the oi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos