Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Seat Leon 1M - Years 1999-2005
Part: Oil filter

Position the vehicle on suitable car ramps to facilitate access to the oil sump and unscrew the drain plug located at the rear to drain the used oil; while the oil is draining, access the engine bay and replace the oil filter cartridge located near the dipstick: unscrew the plastic cap and remove the old filter; then insert the new one along with the new set of O-ring seals, lubricating them with clean oil before refitting; apply the cap to the sump and fill the engine with clean oil until reaching the maximum level.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Filter in the Seat Leon
How to Replace the Oil Filter in the Seat Leon
Seat Leon (2005-2013 / 1P) Open the car's bonnet, pull the dipstick, and lift it on the ramp. Open the breather and let the engine oil drain out. Now unscrew and replace the oi…
Engine Oil Change and Oil Filter Fitting on a Seat Leon
Engine Oil Change and Oil Filter Fitting on a Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) Before proceeding with the engine oil change and fitting the oil filter on the car, position your Seat Leon on a ramp or flat surface (to work undern…
How to change the engine oil and filter of a Seat Leon yourself.
How to change the engine oil and filter of a Seat Leon yourself.
Seat Leon (2012-2019 / MK 3, 5F) On the SEAT Leon, the oil and filter change is performed safely with the vehicle on a flat surface and well supported on jack stands, never just with…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos