Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headrests from a Seat Ateca

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Seat

Video tutorial

Let's see how to remove the rear headrests from a Seat Ateca for a more thorough cleaning. If you try to pull the headrests out by pressing the button at the base of one of the bars, they won't come out. To remove them, use a small flathead screwdriver to press in the hole at the base of one bar while simultaneously pressing the button on the other and pull the headrest upwards.

The procedure for the centre passenger headrest is a bit more complicated due to limited space, but with some patience and skill, it can be done.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Remove the Headrests in a Seat Ateca?
How to Remove the Headrests in a Seat Ateca?
Seat Ateca (2016-2025 / MK 1) This tutorial shows how to remove the headrests from the front seats in a Seat Ateca, a very simple and quick operation. As shown, this model does no…
Where to Find the Fuses in the Seat Ateca
Where to Find the Fuses in the Seat Ateca
Seat Ateca (2016-2025 / MK 1) If you own a Seat Ateca and are wondering where the fuse box is located, read this guide to find it quickly and independently. First, reach the drive…
How to Reset the Service Light on the Seat Ateca
How to Reset the Service Light on the Seat Ateca
Seat Ateca (2016-2025 / MK 1) To reset the service light on a Seat Ateca, follow the same procedure as for a Volkswagen or Skoda. First, turn on the ignition; then press the Menu …

How to Replace the Internal Door Handle on the Opel Corsa D

Replacing the internal door handle on the Opel Corsa D is a relatively simple task you can do yourself, especially with the help of our video tutorial. Open the affected door and begin removing the panel. Use a Torx key to undo the screw located behind the handle and the locking handle. Detach the panel and disconnect the connector. Place the panel on a flat surface and remove the handle. With a screwdriver, undo the small screw on the handle mechanism and then remove everything. Insert the new handle and fit the mechanism. Once tested for functionality, reattach the panel to the door.

Watch the video!


by ScegliAuto

More videos