Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stabilizer bar link of the Citroën C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Anti-roll bar

See other generations:
Video tutorial

To replace the stabilizer link of the Citroen C3, we need to lift the front part of the car and remove the right front wheel. The stabilizer link connects the stabilizer bar to the shock absorbers to keep the wheels always pressed to the ground.

To replace it, we need to remove the upper end of the stabilizer bar with a 16mm wrench and a Torx key of 27. We use the Torx key to stop the rotation of the end and with the adjustable wrench we remove the nut. Once the nuts and the link are removed, we clean any rust and insert the new link.

We screw the nuts using the T27 key and the adjustable wrench.

We tighten the nuts with a torque wrench and mount the wheels to bring the vehicle back to the ground.


Posted on 1 July 2025 by ScegliAuto


Related tutorials

How to Replace the Front Shock Absorbers on a Citroen C3?
How to Replace the Front Shock Absorbers on a Citroen C3?
Citroen C3 (2002-2009 / FC, FN) To replace the front shock absorbers on a first-generation Citroen C3, park the car on a level surface, loosen the wheel bolts, and safely lift the v…
How to remove the bumper of the Citroen C3
How to remove the bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Removing a rear bumper becomes a necessary operation not only in case of replacing it but also if you want to replace the vehicle's crossbeam. Today …
How to Replace the Air Filter on a Citroen C3
How to Replace the Air Filter on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) To replace the air filter on your Citroen C3 Mk3, follow these steps. The entire operation takes just a few minutes and is straightforward. First, co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos