Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the air filter in the Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Air filter
Operation: How to replace the air filter in the Citroen C3

To be able to independently replace the air filter mounted in your Citroen C3 Mk3, you just need to put the following steps into practice. The whole operation takes a few minutes to complete and you will have no difficulty. First, turn off your Citroen C3 completely and lift the bonnet. Remove the engine protection panel with your own hands and immediately after act on the two hooks of the filter box cover. Once this is done, unscrew the various screws that hold the cover in place and, finally, remove the latter too. Now all that remains is to replace the old filter with the new one.


Posted on 10 June 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2009-2016 - Where is the air filter located in the Citroen C3? Read Answer
    • C3 2009-2016 - When to replace the air filter on Citroen C3? Read Answer
    • C3 2002-2009 - Why does the Citroen C3 not keep the minimum? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos