Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Air Filter on the Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

On the Citroen C3, replacing the engine air filter is done from the engine bay and requires access to the plastic filter box. Work with the engine off and cold, park on a flat surface, and open the bonnet. Locate the air filter box and clear the area of any hoses or covers that may prevent you from lifting the lid without strain.

Unlock the clips or screws of the filter box (depending on the version), then lift the lid just enough to remove the used filter. Before inserting the replacement, check that there are no leaves or dust in the housing and clean gently without pushing dirt towards the intake duct.

Insert the new filter, ensuring it is oriented correctly and sits evenly around the perimeter. Close the filter box and restore all clips, verifying that the lid is seated evenly and that there are no gaps.

Refit anything you moved to gain access, then start the engine and perform a quick check.


Posted on 24 July 2026 by ScegliAuto


Related tutorials

Citroen C3 (2002-2009 / FC, FN) If it's time to change the engine air filter of your Citroen C3 and you want to complete the operation on your own, then all you need to do is follow…
Citroen C3 (2009-2016 / SC) How to remove and replace the engine air filter on a Citroen C3? Open the car door, pull up the engine compartment release lever located at the botto…
Citroen C3 (2009-2016 / SC) How to remove the cabin air filter on the Citroen C3? Here’s how to do it from inside the engine bay. Open the engine bay (lift the front bonnet), us…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos