Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorbers on a Citroen C3?

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Shocks

See other generations:
Video tutorial

To replace the front shock absorbers on a first-generation Citroen C3, park the car on a level surface, loosen the wheel bolts, and safely lift the vehicle. Remove the wheel and free the brake line and ABS wiring supports from the strut.

Disconnect the stabiliser bar link, then unscrew the fasteners that connect the strut to the hub. Support the assembly and remove the upper support nuts from the engine bay, then extract the complete strut. Use a suitable spring compressor to compress the spring before removing the upper support.

Remove the shock absorber, bump stop, and dust cover, and install the new components. Reassemble the spring and support, gradually release the compressor, and reinstall the strut.

Reconnect all fasteners and fit the wheel. Finally, it is advisable to check the wheel alignment.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

Replacing the Front Shock Absorbers on a Citroen C3
Replacing the Front Shock Absorbers on a Citroen C3
Citroen C3 (2009-2016 / SC) Replacing the front shock absorber on your car? Let's see how to fit the shock absorbers on a Citroen C3. Lift the car on a column lift and remove th…
Replacing the Rear Bonnet Struts on Citroen C3
Replacing the Rear Bonnet Struts on Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this simple and practical video tutorial, learn how to replace the rear bonnet struts on a Citroen C3. First, open the boot and use a screwdriver …
Removing the front shock absorber from the Citroen C3
Removing the front shock absorber from the Citroen C3
Citroen C3 (2002-2009 / FC, FN) This guide provides step-by-step instructions for removing and replacing the front shock absorbers on the Citroen C3. First, open the bonnet and star…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos