Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the wheel with the spare one on the Citroen C3.

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Wheel

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and replace the wheel with the spare one on the Citroen C3. First, we open the rear hatch of the trunk and start lifting the lining of the luggage compartment, thus accessing the spare wheel and the wheel replacement kit; then we proceed to loosen the wheel bolts with the key, then position the jack and lift the vehicle, as shown in the video.

At this point, we replace the wheel with the spare one, securing the bolts in a crisscross pattern; all that's left is to place the wheel and the replacement kit in the luggage compartment!


Posted on 3 August 2025 by ScegliAuto


Related tutorials

Replacement of the wheel bearing of a Citroen C3 MK1
Replacement of the wheel bearing of a Citroen C3 MK1
Citroen C3 (2002-2009 / FC, FN) In this video we see the replacement of the wheel bearing of a Citroen C1 that has over 680,000 kilometers on the odometer. We lift the car and remov…
How to remove the Citroen emblem from the Citroen C3 wheel cover.
How to remove the Citroen emblem from the Citroen C3 wheel cover.
Citroen C3 (2009-2016 / SC) Today we will explain how to remove the manufacturer's emblem from the wheel cover of the Citroën C3. To perform this operation, we need to insert a …
How to Replace the Timing Belt on a Citroën C3?
How to Replace the Timing Belt on a Citroën C3?
Citroen C3 (2009-2016 / SC) To replace the timing belt on a Citroën C3, loosen the bolts securing the right front wheel and the corresponding inner wheel arch to access the comp…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos