Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the Citroen emblem from the Citroen C3 wheel cover.

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Manufacturer emblem

See other generations:
Video tutorial

Today we will explain how to remove the manufacturer's emblem from the wheel cover of the Citroën C3. To perform this operation, we need to insert a flat-tip screwdriver into the right side. By applying slight pressure outwards, the emblem will be removed and it will then be possible to unscrew the bolts holding the wheel in place and remove it. After replacing the wheel, we can insert the emblem back in place once it is mounted.

To insert the emblem, simply place it on the clips and push it inwards. This operation can be carried out on all vehicles available in the Italian and foreign markets.


Posted on 8 December 2024 by ScegliAuto


Related tutorials

How to remove the maintenance key light on a Citroen C3
How to remove the maintenance key light on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video tutorial, we will see the entire procedure necessary to remove the maintenance key warning light on a Citroen C3, model produced fro…
How to remove the battery of the Citroen C3
How to remove the battery of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today's main steps will show us how to disassemble and replace the battery of the Citroen C3, following the instructions below. First, we open the ca…
How to remove the airbag of the Citroen C3
How to remove the airbag of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Removing the airbag on a 2017 Citroen C3 car is a fairly simple and quick operation to perform independently. The first step is to disconnect the veh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos